Crawlspace During Initial Inspection
This crawlspace has efflorescence, or dried water, all along its brick walls. It's evidence that water is getting in through the brick. On the ceiling, there's hanging insulation. It could be sagging slightly for a multitude of reasons, but the most likely is water. Water is harmful to insulation because once it gets into the insulation it will make it heavy and it will start to fall down. Not only will the basement no longer have insulation, but it has also become a nesting ground for bugs and the like.
Wire Durability
This homeowner has quite a few wires running along their crawlspace floor. This is fine, but rubbing against a dirt floor doesn't exactly promise the wires a very long life. Eventually, if they haven't started already, the wires will begin to wear. The best plan will be to get those wires away from that rocky, dirt floor.
CleanSpace Install
In this photo, the wire problem is solved. Our CleanSpace is smooth and durable. So, these wires can rest against the liner safely. There's also little chance that the wires will rip the CleanSpace. Our liner is thick and reinforced, so unintentional tears seldom occur.
Around Pillars and Posts
Our liner is also designed so that it may wrap around most surfaces. If there are any pillars or posts in area, we like to cover those surfaces at least half-way.
Final Installation
With other surfaces, we may take the CleanSpace liner a little higher or install CleanSpace Wall. Here, we did a bit of both. Around the homeowner's cylindrical items, we've taken the CleanSpace only so far. With others, depending on the texture of the objects, we will cover them almost completely. This is another look at the finished product.