Basement Waterproofing Photo Album: Total Encapsulation in Belton, SC

This home in Belton, SC was experiencing water issues in their crawlspace. Because of the puddling of water in the crawlspace, mold had begun to form in areas. The mold caused weakening of the foundation which caused the floor joist to begin to sag. To solve this problem our All-Dry team had to follow many steps, first the mold needed to be removed. Our All-Dry of the Carolinas Team used Mold-X, this product not only kills existing mold, but prevents further growth. Once the mold issue was tackled, our team used a series of our waterproofing technology to save the home from the water effects in the crawlspace. To begin, CleanSpace liner was added to the crawlspace. CleanSpace is a 20 mil tick liner that is laid across the basement floor and wrapped around walls and piers. This liner works as a barrier to keep moister that is produced from the ground of the basement. In this specific case, the CleanSpace was just placed on the walls; this was to hold in moister that came from the water that dripped down the walls when entering the basement. Once the CleanSpace Wall was installed our All-Dry crew installed our SuperSump pump, which is a pump system that can flush up to 2,650 gallons of water per hour from the basement. Once the waterproofing products were down, our team installed SmartJacks. The SmartJacks were placed under the floor joist of the home and then used to push the floors back into place. To install it, we excavate a two-foot cube at each SmartJack location. The hole is then filled with concrete or engineered to create a stable, loadbearing footing. The SmartJack sits on top of it with a custom-engineered base to prevent the support system from sinking when the moister starts to affect the soil. SmartJacks are then adjusted to the perfect position to support the floor joist of the home. This SmartJack technology, is made of steel which will not rust when exposed to moister and it can also hold over 60,000 pounds! This product was able to save this homes sagging floor problem. With the combination of All-Dry’s different products, this crawlspace in Belton was thankfully saved.